Presonus studiolive 16.0.2 monitor output. With the StudioLive 16.4.2, can you mute an aux output? Either on the physical board or in SL Remote application.

How to get just stereo main mix output from StudioLive 16.0.2 USB sound cable?

presonus studiolive 16.0.2 monitor output

Set the aux output knob to the U position and then use the rotary encoder above the 7 fader to select how much of that channel you want to go to the analog aux output. You got that part exactly right. I have 4 studio live console and never have had an issue with any of them. What i want to do is set up monitor mixes with a jamhub. It's always good to have a backup. Give us a yell if you get jammed up anywhere. Your seller reputation is very important so most good sellers have some type of return policy for items that are not a described.

Nächster

Presonus Audio Training #4 Monitors & Aux Sends

presonus studiolive 16.0.2 monitor output

Sound records ok via StudioLive into Capture and Studio One - but I have no sound from monitors when playing back audio using StudioLive 16. In the device manager I see the StudioLive 16. Presonus has a great service dept and are real nice people to deal with even on non warranty service. After install, click the Settings menu in Universal Control panel. The original owner may have sold you a defective unit.

Nächster

PreSonus Studiolive 16.0.2 Graphic EQ

presonus studiolive 16.0.2 monitor output

I have taken items back before but rarely as I always am very truthful. Do you have a couple of those available? Its been a few years so cant remember all the details and it was with a 16. Monolithent wrote:Yes you can and you can even set it for different songs in the set and change them on the fly. If you do not hear playback from Mains, then your 16. You have the ability to select firewire returns to the channels that you choose. Monolithent wrote:I hope that it will. Of course since you bought it used and from an unauthorized seller on eBay you have no warranty but may have gotten it real cheap.

Nächster

Presonus Audio Training #4 Monitors & Aux Sends

presonus studiolive 16.0.2 monitor output

The outputs are not amplified and if you plug in headphones you'll only get one side functioning. However I watched all of presonus's set up videos and none of them mention any of these boot up protocols or the danger of unplugging the fire wire while the machine was on. Or, you may need to have the proper and current drivers installed. Unhooked the board from the computer and just ran signal through it, nothing on any channel. I sell stuff on eBay and always inform customers of any known issues and sell it accordingly. My problem is: the driver right now missing the routing channel setup. Thank you, -Filip Edit: I forgot to mention: Using StudioLive 16.

Nächster

presonus studiolive 1642 output trouble

presonus studiolive 16.0.2 monitor output

Monolithent wrote:Using virtual instruments work this way. It does bring to mind the question of why you need the jam hub. When you create the mix, you can store it as a scene or an individual channel on the mixer and the computer. Manuals are all on line for almost any product these days:. I can see that it reaching the main bus as the meters are going when I play back, but no sound out of any of the outputs.

Nächster

windows audio output to studio live setup?

presonus studiolive 16.0.2 monitor output

Link channels 1 and 2 on the 16. Hooked it up to universal controller, updated firmware, and installed studio one. You can run monitoring systems without it. I think I'm now going to get rid of the jamhub. Unit did not come with a manual, much to my detriment it would seam. The board would not reset until it was hooked back up and taken out of Firewire mode with the lap top connected.

Nächster